To be enabled for e-commerce, you must first register. Agilent will then confirm your registration and inform you when your enablement is complete and you can begin transacting.
E-commerce is currently not available in your country. For select consumables and supplies you may now use Saved Cart link under your Account to build lists and send to your Agilent Representative. Simply login or register and you may begin.
This Application Note demonstrates the increased sensitivity of the analysis of fatty acid methyl esters (FAME) in jet fuel by coupling the Agilent J&W DB-HeavyWAX GC column with the Energy Institute Method IP 585.
The Agilent J&W DB-HeavyWAX column provides an increased maximum temperature range, which allows for the analysis of higher boiling compounds in pyrolysis gasoline, while minimizing the possibility of carryover from sample to sample
The increased temperature limit of the Agilent J&W DB-HeavyWAX provides a more thermally stable column, even after 100 hours operating at high temperatures of 280 °C
propylene oxide impurities were analyzed with low method-detection limit, good resolution, sample recovery, and repeatability using Agilent J&W PoraBOND U.
An improved gas chromatographic method based on a 7890 Series GC for the analysis of trace hydrocarbon impurities in monomer grade 1, 3-Butadiene has been developed.
Residual monomers are determined in a series of polymers including poly methyl methacrylate, poly acrylic, styrene co-methyl methacrylate, and styrene co-butadiene.