Refine Results
- Applications and Industries
- Content Type
- Analysis Platform
- Language
1 - 20 of 44 results
Sustained stability across >13,700 continuous injections on the Agilent 6495D.
This study shows enhanced nanoflow LC/TQ system Evosep One LC, Newomics UniESI ion source, Agilent 6495D for large-panel targeted proteomics in human cell lysate.
This application note demonstrates a comprehensive workflow, including sample preparation, consumables, data acquisition/analysis, and reporting for PFAS listed in EPA Method 1633 Draft 4 and in E.U. and U.K. regulations.
This guide is valid for MassHunter 12.1 and greater, until superseded.
This guide provides instructions for installing or upgrading MassHunter Qualitative Analysis 13.0 and later, and MassHunter Quantitative Analysis 12.1 and later.
This application note presents a comprehensive analytical method for the simultaneous detection and quantification of 11 nitrosamine impurities.
Release notes for MassHunter Acquisition for LC/TQ.
Site preparation information for G6475A and G6495D LC/TQ systems.
If you are under pressure to deliver meaningful results, the 6495 triple quadrupole LC/MS (LC/TQ) is the sensitive, robust choice. Comprehensive workflows get your lab up and running fast.
2024 ebook highlighting Seahorse XF and mass spec. Discover synergistic workflows combining Seahorse XF live cell analyzers with Agilent's mass spectrometry systems to provide deep insights into metabolism.
A comprehensive LC/MS/MS method for 764 pesticides in QuEChERS tomato raw extract was established using the 6495D triple quadrupole LC/MS system.
This application note details an MRM-based method for Tirzepatide quantification.
This guide provides information on the Ultivo, 6475A, and 6495D LC/TQ systems running MassHunter Data Acquisition 12.1 or higher.
In this application note, an analysis of eight nitrosamine compounds was performed, with particular attention to detection at levels lower than required by regulatory standards.
Boost efficiency and productivity with instrument intelligence and smart automation for LC/TQ, LC/TOF, and LC/Q-TOF workflows.
This application note details the results obtained from nonstop injection of sample in a dirty matrix, spanning over 2,000 injections, and 16 days of nonstop operation of an Agilent 6495D LC/MS system.
In this application note, method transferability between laboratories is described, with particular attention to measurable values across four lab environments.
When you use the Edwards nXL200i Enhanced dry pump, the 6495D LC/TQ becomes the most sustainable option.
Pace Labs uses Agilent 6495D LC/TQ and MassHunter software to meet PFAS testing demands with speed, sensitivity, and regulatory compliance
This study developed a fully automated workflow for PFAS quantitation in shrimp, using the PAL3 autosampler and 6495D LC/TQ. The PAL3 platform performed sample preparation automatically, while data acquisition and analysis were conducted in...