Refine Results
- Content Type
- Analysis Platform
- Language
1 - 20 of 26 results
Sustained stability across >13,700 continuous injections on the Agilent 6495D.
This study shows enhanced nanoflow LC/TQ system Evosep One LC, Newomics UniESI ion source, Agilent 6495D for large-panel targeted proteomics in human cell lysate.
This application note demonstrates a comprehensive workflow, including sample preparation, consumables, data acquisition/analysis, and reporting for PFAS listed in EPA Method 1633 Draft 4 and in E.U. and U.K. regulations.
This guide is valid for MassHunter 12.1 and greater, until superseded.
This guide provides instructions for installing or upgrading MassHunter Qualitative Analysis 13.0 and later, and MassHunter Quantitative Analysis 12.1 and later.
This application note presents a comprehensive analytical method for the simultaneous detection and quantification of 11 nitrosamine impurities.
Release notes for MassHunter Acquisition for LC/TQ.
Site preparation information for G6475A and G6495D LC/TQ systems.
If you are under pressure to deliver meaningful results, the 6495 triple quadrupole LC/MS (LC/TQ) is the sensitive, robust choice. Comprehensive workflows get your lab up and running fast.
2024 ebook highlighting Seahorse XF and mass spec. Discover synergistic workflows combining Seahorse XF live cell analyzers with Agilent's mass spectrometry systems to provide deep insights into metabolism.
When you use the Edwards nXL200i Enhanced dry pump, the 6495D LC/TQ becomes the most sustainable option.
Pace Labs uses Agilent 6495D LC/TQ and MassHunter software to meet PFAS testing demands with speed, sensitivity, and regulatory compliance
This study developed a fully automated workflow for PFAS quantitation in shrimp, using the PAL3 autosampler and 6495D LC/TQ. The PAL3 platform performed sample preparation automatically, while data acquisition and analysis were conducted in...
An automated LCMS workflow was developed for semaglutide quantification in human plasma. The lower limit of quantification is 0.2 ng/mL and linear up to 1000 ng/mL from 100 μL of starting material, covering a dynamic range of 3.7 order of magnitude.
This study demonstrated significant enhancement using a modified nanoflow LC/MS system, including Evosep One LC, Newomics ion source and Agilent 6495D Triple Quadrupole LC/MS system, for large panel targeted proteome quantification in low-amount...
15 traditional nitrosamines have been assessed in Deferiprone drug using APCI-6495D. The standard sensitivities are showcased at 0.05 ng/mL and RSD between 2.5-9%. The obtained LOQ values are 3-8000 times lower than desired limit levels.
Highly Sensitive Quantitation of N-Nitroso Timolol Impurity in Timolol API using the Agilent 6495D LC/TQ
A novel end-to-end workflow was developed and validated to support reliable and consistent quantitative analysis of PFAS in tissue.
The robustness of a 6495D LC/TQ was tested using undiluted salmon extract. During the experiment, the system was exposed to more than 130 mL of the matrix over a period of ~3 weeks of continuous operation, without any maintenance.
Acylcarnitine profile analysis is a commonly requested analysis in genetic disease research laboratories due to their wide metabolic involvement. A new comprehensive LC-MS/MS method was developed to quantify 32 acylcarnitine species.